Thirstpoint Hot & Cold Water Dispenser TP 14

The Thirstpoint TP14 Hot and  Cold Water Dispenser is a floor standing design.  It delivers both ice chilled and hot water and is plumbed directly into the mains.  This means it never runs out and provides an instant and continuous supply of hot and cold filtered drinking water.

Total volume below 10° C	10 litres per hour
Net weight:	18Kg
Power in:	220/240 volts, 5 Amps
Power used:	22V 50/60hz
Power cable	UK 3 pin Plug
Cold Water:	4-8°C S/Steel, 3Ltr
Hot Temperature:	87-92°C
Dispenser Height:	1150mm
Dispenser Width:	340mm
Dispenser Depth:	340mm
Advanced Filtration System:	Yes
Compressor:	1/10 HP Sealed Type
Condenser:	Wire Type
Refrigerant:	R-134A
Max Water Pressure:	9 bar (125 PSI)
Service:	ServiceLink™ bi annual site visits
Support:	24 hour call out*
Power On Indicator:	Yes
External cup dispenser:	75 cups (if supplied by thirstpoint)
Approvals:	CE, BEAB & WBS

Ambient temperature Av 15°C

* Our average response & fix time is 4 hours!

 Sitemap | Cold Water Dispensers | Hot Water Dispensers | Water Fountains | About

© Copyright Thirstpoint 2008